Merge branch 'development-202206' into 'development-202206'

Development 202206

See merge request !16

src/config/CodeTable/index.js

@@ -432,6 +432,12 @@ const CodeTable = {
         { label: "暂存的", value: "T" },
         { label: "已下载", value: "" },
     ],
+
+    adrsta1: [
+        { label: "暂存的", value: "T" },
+        { label: "已下载", value: "D" },
+        { label: "NULL", value: "" },
+    ],
     advtyp0: [
         { label: "不符点通知(MT750)", value: "750" },
         { label: "付款通知(MT754)", value: "754" },
@@ -719,7 +725,11 @@ const CodeTable = {
         { label: "注销", value: "1" },
     ],
     bchtyp: [
-        { label: "押汇中心华北组", value: "5" },
+        { label: "经办行", value: "1" },
+        { label: "非经办行", value: "2" },
+        { label: "总行押汇中心", value: "3" },
+        { label: "一级虚拟机构", value: "4" },
+        { label: "二级虚拟机构", value: "5" },
     ],
     bckgrd: [
         { label: "未定义", value: "" },
@@ -1654,6 +1664,11 @@ const CodeTable = {
         { label: "合同金额", value: "CONAMT" },
         { label: "增加金额", value: "AMEAMT" },
     ],
+    calfcc: [
+        { label: "使用原有计算条件", value: "N" },
+        { label: "使用新的计算条件", value: "S" },
+        { label: "未启用", value: "" },
+    ],
     calflg: [
         { label: "最大值", value: "U" },
         { label: "不计算", value: "" },
@@ -3798,6 +3813,10 @@ const CodeTable = {
         { label: "包括", value: "I" },
         { label: "排除", value: "E" },
     ],
+    incflgFee: [
+        { label: "与交易无关", value: "" },
+        { label: "用于统计", value: "Y" },
+    ],
     industrycode: [
         { label: "2096 国际组织", value: "2096" },
         { label: "0332 有色金属冶炼和压延加工业", value: "0332" },
@@ -5790,6 +5809,10 @@ const CodeTable = {
         { label: "否", value: "" },
         { label: "是", value: "X" },
     ],
+    hbkaccflg: [
+        { label: "未启用", value: "" },
+        { label: "已启用", value: "X" },
+    ],
     shwflg: [
         { label: "发送通知", value: "N" },
         { label: "到期", value: "X" },
@@ -5915,6 +5938,11 @@ const CodeTable = {
         { label: "已删除", value: "G" },
         { label: "待确认", value: "P" },
     ],
+    staflgFee: [
+        { label: "Commission", value: "2" },
+        { label: "Charge", value: "3" },
+        { label: "未启用", value: "" },
+    ],
     staflg1: [
         { label: "全部", value: "" },
         { label: "待发送", value: "W" },
@@ -6000,6 +6028,16 @@ const CodeTable = {
         { label: "多式或联合运输单据", value: "010" },
         { label: "发票", value: "067" },
     ],
+
+    setchgflg:[
+        { label: "Changes allowed CP-Cond. & amount protected", value: "" },
+        { label: "Amount protected", value: "AP" },
+        { label: "Amount mandatory", value: "AM" },
+        { label: "Rate mandatory", value: "RM" },
+        { label: "Rate & Amount mandatory", value: "BM" },
+        { label: "Minimum mandatory", value: "MM" },
+        { label: "Minimum mandatory no rate", value: "MO" },
+    ],
     swftyp: [
         { label: "MT103+MT202", value: "103202" },
         { label: "MT103+MT910", value: "103910" },
@@ -6424,6 +6462,11 @@ const CodeTable = {
         { label: "进口组", value: "I" },
         { label: "出口组", value: "E" },
     ],
+    usgpat: [
+        { label: "Main Address", value: "MAA" },
+        { label: "Additional Address", value: "MAB" },
+        { label: "NULL", value: "" },
+    ],
     usrbchtyp: [
         { label: "按分行配置", value: "B" },
         { label: "按机构配置", value: "C" },

src/views/Statics/Dbiact/ActInfo.vue

@@ -24,7 +24,12 @@
       </c-col>
       <c-col :span="24">
         <el-form-item label="账号优先级" prop="pri">
-          <c-input v-model="model.pri" placeholder="请输入账号优先级" > </c-input>
+          <c-select style="width: 100%"
+                v-model="model.pri"
+               placeholder="请选择账号优先级"
+                :code="getCodesByKey('pri')"
+            >
+            </c-select>
         </el-form-item>
       </c-col>
       <c-col :span="24">
@@ -159,7 +164,12 @@
       </c-col>
       <c-col :span="24">
         <el-form-item label="账号类型" prop="typ">
-          <c-input v-model="model.typ" placeholder="请输入账号类型" > </c-input>
+          <c-select style="width: 100%"
+                v-model="model.typ"
+               placeholder="请选择账号类型"
+                :code="getCodesByKey('acttyp')"
+            >
+            </c-select>
         </el-form-item>
       </c-col>
       <c-col :span="24">

src/views/Statics/Dbiatp/Atp.js

@@ -32,7 +32,7 @@ export const Pattern = {
 		{ "max": 6, "message": "最大长度6个字符", "trigger": "blur" }
 	],
 	"rouflg": [
-		{ "required": true, "message": "必输项", "type": "string", "trigger": "blur" },
+		{ "required": false, "message": "必输项", "type": "string", "trigger": "blur" },
 		{ "max": 1, "message": "最大长度1个字符", "trigger": "blur" }
 	],
 	"bus": [
@@ -40,23 +40,23 @@ export const Pattern = {
 		{ "max": 2, "message": "最大长度2个字符", "trigger": "blur" }
 	],
 	"concreflg": [
-		{ "required": true, "message": "必输项", "type": "string", "trigger": "blur" },
+		{ "required": false, "message": "必输项", "type": "string", "trigger": "blur" },
 		{ "max": 1, "message": "最大长度1个字符", "trigger": "blur" }
 	],
 	"dtaflg": [
-		{ "required": true, "message": "必输项", "type": "string", "trigger": "blur" },
+		{ "required": false, "message": "必输项", "type": "string", "trigger": "blur" },
 		{ "max": 1, "message": "最大长度1个字符", "trigger": "blur" }
 	],
 	"sepflg": [
-		{ "required": true, "message": "必输项", "type": "string", "trigger": "blur" },
+		{ "required": false, "message": "必输项", "type": "string", "trigger": "blur" },
 		{ "max": 1, "message": "最大长度1个字符", "trigger": "blur" }
 	],
 	"jobflg": [
-		{ "required": true, "message": "必输项", "type": "string", "trigger": "blur" },
+		{ "required": false, "message": "必输项", "type": "string", "trigger": "blur" },
 		{ "max": 1, "message": "最大长度1个字符", "trigger": "blur" }
 	],
 	"subflg": [
-		{ "required": true, "message": "必输项", "type": "string", "trigger": "blur" },
+		{ "required": false, "message": "必输项", "type": "string", "trigger": "blur" },
 		{ "max": 1, "message": "最大长度1个字符", "trigger": "blur" }
 	],
 	"lnkobj": [
@@ -64,7 +64,7 @@ export const Pattern = {
 		{ "max": 6, "message": "最大长度6个字符", "trigger": "blur" }
 	],
 	"ccstyp": [
-		{ "required": true, "message": "必输项", "type": "string", "trigger": "blur" },
+		{ "required": false, "message": "必输项", "type": "string", "trigger": "blur" },
 		{ "max": 3, "message": "最大长度3个字符", "trigger": "blur" }
 	],
 	"ver": [
@@ -72,19 +72,19 @@ export const Pattern = {
 		{ "max": 4, "message": "最大长度4个字符", "trigger": "blur" }
 	],
 	"bustrnflg": [
-		{ "required": true, "message": "必输项", "type": "string", "trigger": "blur" },
+		{ "required": false, "message": "必输项", "type": "string", "trigger": "blur" },
 		{ "max": 1, "message": "最大长度1个字符", "trigger": "blur" }
 	],
 	"relamt": [
-		{ "required": true, "message": "必输项", "type": "string", "trigger": "blur" },
+		{ "required": false, "message": "必输项", "type": "string", "trigger": "blur" },
 		{ "max": 1, "message": "最大长度1个字符", "trigger": "blur" }
 	],
 	"reltyp": [
-		{ "required": true, "message": "必输项", "type": "string", "trigger": "blur" },
+		{ "required": false, "message": "必输项", "type": "string", "trigger": "blur" },
 		{ "max": 1, "message": "最大长度1个字符", "trigger": "blur" }
 	],
 	"negflg": [
-		{ "required": true, "message": "必输项", "type": "string", "trigger": "blur" },
+		{ "required": false, "message": "必输项", "type": "string", "trigger": "blur" },
 		{ "max": 1, "message": "最大长度1个字符", "trigger": "blur" }
 	],
 	"dealtim": [

src/views/Statics/Dbiatp/AtpInfo.vue

@@ -21,11 +21,12 @@
     </c-col>
 	<c-col :span="24">
         <el-form-item label="控制标志" prop="rouflg">
-            <c-input
+            <c-select style="width: 100%"
                 v-model="model.rouflg"
-                placeholder="请输入控制标志"
+               placeholder="请选择控制标志"
+                :code="getCodesByKey('chgcurflg')"
             >
-            </c-input>
+            </c-select>
         </el-form-item>
     </c-col>
 	<c-col :span="24">
@@ -39,47 +40,52 @@
     </c-col>
 	<c-col :span="24">
         <el-form-item label="创建新进程标志" prop="concreflg">
-            <c-input
+            <c-select style="width: 100%"
                 v-model="model.concreflg"
-                placeholder="请输入创建新进程标志"
+               placeholder="请选择创建新进程标志"
+                :code="getCodesByKey('concreflg')"
             >
-            </c-input>
+            </c-select>
         </el-form-item>
     </c-col>
 	<c-col :span="24">
         <el-form-item label="处理数据标志" prop="dtaflg">
-            <c-input
+            <c-select style="width: 100%"
                 v-model="model.dtaflg"
-                placeholder="请输入处理数据标志"
+               placeholder="请选择处理数据标志"
+                :code="getCodesByKey('chgcurflg')"
             >
-            </c-input>
+            </c-select>
         </el-form-item>
     </c-col>
 	<c-col :span="24">
         <el-form-item label="处理临时结算标志" prop="sepflg">
-            <c-input
+            <c-select style="width: 100%"
                 v-model="model.sepflg"
-                placeholder="请输入处理临时结算标志"
+               placeholder="请选择处理临时结算标志"
+                :code="getCodesByKey('chgcurflg')"
             >
-            </c-input>
+            </c-select>
         </el-form-item>
     </c-col>
 	<c-col :span="24">
         <el-form-item label="后台进程标志" prop="jobflg">
-            <c-input
+            <c-select style="width: 100%"
                 v-model="model.jobflg"
-                placeholder="请输入后台进程标志"
+               placeholder="请选择后台进程标志"
+                :code="getCodesByKey('chgcurflg')"
             >
-            </c-input>
+            </c-select>
         </el-form-item>
     </c-col>
 	<c-col :span="24">
         <el-form-item label="创建子合同进程" prop="subflg">
-            <c-input
+            <c-select style="width: 100%"
                 v-model="model.subflg"
-                placeholder="请输入创建子合同进程"
+               placeholder="请选择创建子合同进程"
+                :code="getCodesByKey('chgcurflg')"
             >
-            </c-input>
+            </c-select>
         </el-form-item>
     </c-col>
 </c-col>
@@ -95,11 +101,12 @@
     </c-col>
 	<c-col :span="24">
         <el-form-item label="比较类型" prop="ccstyp">
-            <c-input
+            <c-select style="width: 100%"
                 v-model="model.ccstyp"
-                placeholder="请输入比较类型"
+               placeholder="请选择比较类型"
+                :code="getCodesByKey('ccstyp')"
             >
-            </c-input>
+            </c-select>
         </el-form-item>
     </c-col>
 <!--	<c-col :span="24">-->
@@ -113,38 +120,42 @@
 <!--    </c-col>-->
 	<c-col :span="24">
         <el-form-item label="交易处理标志" prop="bustrnflg">
-            <c-input
+            <c-select style="width: 100%"
                 v-model="model.bustrnflg"
-                placeholder="请输入交易处理标志"
+               placeholder="请选择交易处理标志"
+                :code="getCodesByKey('chgcurflg')"
             >
-            </c-input>
+            </c-select>
         </el-form-item>
     </c-col>
 	<c-col :span="24">
         <el-form-item label="用于释放的金额" prop="relamt">
-            <c-input
+            <c-select style="width: 100%"
                 v-model="model.relamt"
-                placeholder="请输入用于释放的金额"
+               placeholder="请选择用于释放的金额"
+                :code="getCodesByKey('relamt')"
             >
-            </c-input>
+            </c-select>
         </el-form-item>
     </c-col>
 	<c-col :span="24">
         <el-form-item label="释放规则类型" prop="reltyp">
-            <c-input
+            <c-select style="width: 100%"
                 v-model="model.reltyp"
-                placeholder="请输入释放规则类型"
+               placeholder="请选择释放规则类型"
+                :code="getCodesByKey('reltyp')"
             >
-            </c-input>
+            </c-select>
         </el-form-item>
     </c-col>
 	<c-col :span="24">
         <el-form-item label="押汇中心处理标志" prop="negflg">
-            <c-input
+            <c-select style="width: 100%"
                 v-model="model.negflg"
-                placeholder="请输入押汇中心处理标志"
+               placeholder="请选择押汇中心处理标志"
+                :code="getCodesByKey('chgcurflg')"
             >
-            </c-input>
+            </c-select>
         </el-form-item>
     </c-col>
 	<c-col :span="24">
@@ -161,12 +172,18 @@
 </template>
 
 <script>
+import codes from "~/config/CodeTable";
 export default {
   name: "",
   props: ["model"],
   data() {
     return {};
   },
+  methods:{
+    getCodesByKey(key) {
+      return codes[key] ?? [];
+    },
+  },
 };
 </script>
 

src/views/Statics/Dbiatx/AtxInfo.vue

@@ -48,11 +48,12 @@
     </c-col> -->
     <c-col :span="24">
         <el-form-item label="语言" prop="uil">
-            <c-input
+            <c-select style="width: 100%"
                 v-model="model.uil"
-                placeholder="请输入语言"
+               placeholder="请选择语言"
+                :code="getCodesByKey('gtxuil')"
             >
-            </c-input>
+            </c-select>
         </el-form-item>
     </c-col>
     <c-col :span="24">
@@ -124,11 +125,11 @@
     </c-col>
     <c-col :span="24">
         <el-form-item label="保函文本中的交易日期" prop="laborcdat">
-            <c-input
+            <c-date-picker style="width: 100%"
                 v-model="model.laborcdat"
                 placeholder="请输入保函文本中的交易日期"
             >
-            </c-input>
+            </c-date-picker>
         </el-form-item>
     </c-col>
     <c-col :span="24">
@@ -286,12 +287,18 @@
 </template>
 
 <script>
+import codes from "~/config/CodeTable";
 export default {
   name: "",
   props: ["model"],
   data() {
     return {};
   },
+  methods: {
+    getCodesByKey(key) {
+      return codes[key] ?? [];
+    },
+  },
 };
 </script>
 

src/views/Statics/Dbiatx/index.vue

@@ -5,7 +5,7 @@
 
       <el-form
         ref="modelForm"
-        label-width="120px"
+        label-width="160px"
         size="small"
         label-position="right"
         :model="model"

src/views/Statics/Dbibch/BchInfo.vue

@@ -48,11 +48,12 @@
     </c-col>
 	<c-col :span="24">
         <el-form-item label="机构层次" prop="lev">
-            <c-input
+            <c-select style="width: 100%"
                 v-model="model.lev"
-                placeholder="请输入机构层次"
+               placeholder="请选择机构层次"
+                :code="getCodesByKey('lev')"
             >
-            </c-input>
+            </c-select>
         </el-form-item>
     </c-col>
 	<c-col :span="24">
@@ -66,11 +67,12 @@
     </c-col>
     <c-col :span="24">
         <el-form-item label="机构类型" prop="bchtyp">
-            <c-input
+            <c-select style="width: 100%"
                 v-model="model.bchtyp"
-                placeholder="请输入机构类型"
+               placeholder="请选择机构类型"
+                :code="getCodesByKey('bchtyp')"
             >
-            </c-input>
+            </c-select>
         </el-form-item>
     </c-col>
 	<!-- <c-col :span="24">
@@ -230,11 +232,12 @@
     </c-col>
 	<c-col :span="24">
         <el-form-item label="状态" prop="sta">
-            <c-input
+            <c-select style="width: 100%"
                 v-model="model.sta"
-                placeholder="请输入状态"
+               placeholder="请选择状态"
+                :code="getCodesByKey('bchsta')"
             >
-            </c-input>
+            </c-select>
         </el-form-item>
     </c-col>
 	<c-col :span="24">
@@ -324,12 +327,18 @@
 </template>
 
 <script>
+import codes from "~/config/CodeTable";
 export default {
   name: "",
   props: ["model"],
   data() {
     return {};
   },
+  methods:{
+    getCodesByKey(key) {
+      return codes[key] ?? [];
+    },
+  }
 };
 </script>
 

src/views/Statics/Dbifec/Fec.js

@@ -127,7 +127,7 @@ export const Pattern = {
 		{ "max": 6, "message": "最大长度6个字符", "trigger": "blur" }
 	],
 	"calfcc": [
-		{ "required": true, "message": "必输项", "type": "string", "trigger": "blur" },
+		{ "required": false, "message": "必输项", "type": "string", "trigger": "blur" },
 		{ "max": 1, "message": "最大长度1个字符", "trigger": "blur" }
 	],
 	"lowamt": [
@@ -199,19 +199,19 @@ export const Pattern = {
 		{ "max": 1, "message": "最大长度1个字符", "trigger": "blur" }
 	],
 	"setbeg": [
-		{ "required": true, "message": "必输项", "type": "string", "trigger": "blur" },
+		{ "required": false, "message": "必输项", "type": "string", "trigger": "blur" },
 		{ "max": 1, "message": "最大长度1个字符", "trigger": "blur" }
 	],
 	"setend": [
-		{ "required": true, "message": "必输项", "type": "string", "trigger": "blur" },
+		{ "required": false, "message": "必输项", "type": "string", "trigger": "blur" },
 		{ "max": 1, "message": "最大长度1个字符", "trigger": "blur" }
 	],
 	"pertyp": [
-		{ "required": true, "message": "必输项", "type": "string", "trigger": "blur" },
+		{ "required": false, "message": "必输项", "type": "string", "trigger": "blur" },
 		{ "max": 6, "message": "最大长度6个字符", "trigger": "blur" }
 	],
 	"tirtyp": [
-		{ "required": true, "message": "必输项", "type": "string", "trigger": "blur" },
+		{ "required": false, "message": "必输项", "type": "string", "trigger": "blur" },
 		{ "max": 6, "message": "最大长度6个字符", "trigger": "blur" }
 	],
 	"permin": [
@@ -315,7 +315,7 @@ export const Pattern = {
 		{ "pattern": /^-?\d{0,14}(\.\d{1,6})?$/, "message": "整数不能超过14位，小数不能超过6位", "trigger": "blur" }
 	],
 	"colltr": [
-		{ "required": true, "message": "必输项", "type": "string", "trigger": "blur" },
+		{ "required": false, "message": "必输项", "type": "string", "trigger": "blur" },
 		{ "max": 1, "message": "最大长度1个字符", "trigger": "blur" }
 	],
 	"settyp": [
@@ -331,7 +331,7 @@ export const Pattern = {
 		{ "max": 2, "message": "最大长度2个字符", "trigger": "blur" }
 	],
 	"setchgflg": [
-		{ "required": true, "message": "必输项", "type": "string", "trigger": "blur" },
+		{ "required": false, "message": "必输项", "type": "string", "trigger": "blur" },
 		{ "max": 2, "message": "最大长度2个字符", "trigger": "blur" }
 	],
 	"pertypprv": [
@@ -407,11 +407,11 @@ export const Pattern = {
 		{ "max": 3, "message": "最大长度3个字符", "trigger": "blur" }
 	],
 	"incflgFee": [
-		{ "required": true, "message": "必输项", "type": "string", "trigger": "blur" },
+		{ "required": false, "message": "必输项", "type": "string", "trigger": "blur" },
 		{ "max": 1, "message": "最大长度1个字符", "trigger": "blur" }
 	],
 	"staflgFee": [
-		{ "required": true, "message": "必输项", "type": "string", "trigger": "blur" },
+		{ "required": false, "message": "必输项", "type": "string", "trigger": "blur" },
 		{ "max": 1, "message": "最大长度1个字符", "trigger": "blur" }
 	],
 	"vatflgFee": [

src/views/Statics/Dbifec/FecInfo.vue

@@ -49,20 +49,22 @@
         </c-col>
       <c-col :span="24">
             <el-form-item label="费用计算基准金额" prop="calcbs">
-                <c-input
-                    v-model="model.calcbs"
-                    placeholder="请输入费用计算基准金额"
-                >
-                </c-input>
+                <c-select style="width: 100%"
+                v-model="model.calcbs"
+               placeholder="请选择费用计算基准金额"
+                :code="getCodesByKey('calcbs')"
+            >
+            </c-select>
             </el-form-item>
         </c-col>
       <c-col :span="24">
             <el-form-item label="计算条件" prop="calfcc">
-                <c-input
-                    v-model="model.calfcc"
-                    placeholder="请输入计算条件"
-                >
-                </c-input>
+                <c-select style="width: 100%"
+                v-model="model.calfcc"
+               placeholder="请选择计算条件"
+                :code="getCodesByKey('calfcc')"
+            >
+            </c-select>
             </el-form-item>
         </c-col>
       <c-col :span="24">
@@ -99,11 +101,12 @@
         </c-col>
       <c-col :span="24">
             <el-form-item label="最大金额代码" prop="maxfcc">
-                <c-input
-                    v-model="model.maxfcc"
-                    placeholder="请输入最大金额代码"
-                >
-                </c-input>
+                <c-select style="width: 100%"
+                v-model="model.maxfcc"
+               placeholder="请选择最大金额代码"
+                :code="getCodesByKey('maxfcc')"
+            >
+            </c-select>
             </el-form-item>
         </c-col>
       <c-col :span="24">
@@ -140,11 +143,12 @@
         </c-col>
       <c-col :span="24">
             <el-form-item label="最小金额代码" prop="minfcc">
-                <c-input
-                    v-model="model.minfcc"
-                    placeholder="请输入最小金额代码"
-                >
-                </c-input>
+                <c-select style="width: 100%"
+                v-model="model.minfcc"
+               placeholder="请选择最小金额代码"
+                :code="getCodesByKey('minfcc')"
+            >
+            </c-select>
             </el-form-item>
         </c-col>
       <c-col :span="24">
@@ -172,11 +176,12 @@
         </c-col>
       <c-col :span="24">
             <el-form-item label="费率条件" prop="ratfcc">
-                <c-input
-                    v-model="model.ratfcc"
-                    placeholder="请输入费率条件"
-                >
-                </c-input>
+                <c-select style="width: 100%"
+                v-model="model.ratfcc"
+               placeholder="请选择费率条件"
+                :code="getCodesByKey('ratfcc')"
+            >
+            </c-select>
             </el-form-item>
         </c-col>
       <c-col :span="24">
@@ -199,47 +204,52 @@
         </c-col>
       <c-col :span="24">
             <el-form-item label="结算方式" prop="setmod">
-                <c-input
-                    v-model="model.setmod"
-                    placeholder="请输入结算方式"
-                >
-                </c-input>
+                <c-select style="width: 100%"
+                v-model="model.setmod"
+               placeholder="请选择结算方式"
+                :code="getCodesByKey('setmod')"
+            >
+            </c-select>
             </el-form-item>
         </c-col>
       <c-col :span="24">
             <el-form-item label="结算起算时间" prop="setbeg">
-                <c-input
-                    v-model="model.setbeg"
-                    placeholder="请输入结算起算时间"
-                >
-                </c-input>
+                <c-select style="width: 100%"
+                v-model="model.setbeg"
+               placeholder="请选择结算起算时间"
+                :code="getCodesByKey('setbeg')"
+            >
+            </c-select>
             </el-form-item>
         </c-col>
       <c-col :span="24">
             <el-form-item label="结算终止时间" prop="setend">
-                <c-input
-                    v-model="model.setend"
-                    placeholder="请输入结算终止时间"
-                >
-                </c-input>
+                <c-select style="width: 100%"
+                v-model="model.setend"
+               placeholder="请选择结算终止时间"
+                :code="getCodesByKey('setend')"
+            >
+            </c-select>
             </el-form-item>
         </c-col>
       <c-col :span="24">
             <el-form-item label="周期类型" prop="pertyp">
-                <c-input
-                    v-model="model.pertyp"
-                    placeholder="请输入周期类型"
-                >
-                </c-input>
+                <c-select style="width: 100%"
+                v-model="model.pertyp"
+               placeholder="请选择周期类型"
+                :code="getCodesByKey('setend')"
+            >
+            </c-select>
             </el-form-item>
         </c-col>
       <c-col :span="24">
             <el-form-item label="分级计算的基础单元" prop="tirtyp">
-                <c-input
-                    v-model="model.tirtyp"
-                    placeholder="请输入分级计算的基础单元"
-                >
-                </c-input>
+                <c-select style="width: 100%"
+                v-model="model.tirtyp"
+               placeholder="请选择分级计算的基础单元"
+                :code="getCodesByKey('tirtyp')"
+            >
+            </c-select>
             </el-form-item>
         </c-col>
       <c-col :span="24">
@@ -471,56 +481,62 @@
         </c-col>
       <c-col :span="24">
             <el-form-item label="默认处理方式" prop="colltr">
-                <c-input
-                    v-model="model.colltr"
-                    placeholder="请输入默认处理方式"
-                >
-                </c-input>
+                <c-select style="width: 100%"
+                v-model="model.colltr"
+               placeholder="请选择默认处理方式"
+                :code="getCodesByKey('colltr')"
+            >
+            </c-select>
             </el-form-item>
         </c-col>
       <c-col :span="24">
             <el-form-item label="结算方式" prop="settyp">
-                <c-input
-                    v-model="model.settyp"
-                    placeholder="请输入结算方式"
-                >
-                </c-input>
+                <c-select style="width: 100%"
+                v-model="model.settyp"
+               placeholder="请选择结算方式"
+                :code="getCodesByKey('settyp')"
+            >
+            </c-select>
             </el-form-item>
         </c-col>
       <c-col :span="24">
             <el-form-item label="自动结算标志" prop="setflg">
-                <c-input
-                    v-model="model.setflg"
-                    placeholder="请输入自动结算标志"
-                >
-                </c-input>
+                <c-select style="width: 100%"
+                v-model="model.setflg"
+               placeholder="请选择自动结算标志"
+                :code="getCodesByKey('setflg')"
+            >
+            </c-select>
             </el-form-item>
         </c-col>
       <c-col :span="24">
             <el-form-item label="结算周期标志" prop="setperflg">
-                <c-input
-                    v-model="model.setperflg"
-                    placeholder="请输入结算周期标志"
-                >
-                </c-input>
+                <c-select style="width: 100%"
+                v-model="model.setperflg"
+               placeholder="请选择结算周期标志"
+                :code="getCodesByKey('setperflg')"
+            >
+            </c-select>
             </el-form-item>
         </c-col>
       <c-col :span="24">
             <el-form-item label="允许变动标志" prop="setchgflg">
-                <c-input
-                    v-model="model.setchgflg"
-                    placeholder="请输入允许变动标志"
-                >
-                </c-input>
+                <c-select style="width: 100%"
+                v-model="model.setchgflg"
+               placeholder="请选择允许变动标志"
+                :code="getCodesByKey('setchgflg')"
+            >
+            </c-select>
             </el-form-item>
         </c-col>
       <c-col :span="24">
             <el-form-item label="周期类型（前一周期）" prop="pertypprv">
-                <c-input
-                    v-model="model.pertypprv"
-                    placeholder="请输入周期类型（前一周期）"
-                >
-                </c-input>
+                <c-select style="width: 100%"
+                v-model="model.pertypprv"
+               placeholder="请选择周期类型"
+                :code="getCodesByKey('pertypprv')"
+            >
+            </c-select>
             </el-form-item>
         </c-col>
       <c-col :span="24">
@@ -615,11 +631,12 @@
         </c-col>
       <c-col :span="24">
             <el-form-item label="重算标志" prop="clcdifflg">
-                <c-input
-                    v-model="model.clcdifflg"
-                    placeholder="请输入重算标志"
-                >
-                </c-input>
+                <c-select style="width: 100%"
+                v-model="model.clcdifflg"
+               placeholder="请选择重算标志"
+                :code="getCodesByKey('clcdifflg')"
+            >
+            </c-select>
             </el-form-item>
         </c-col>
       <c-col :span="24">
@@ -633,11 +650,12 @@
         </c-col>
       <c-col :span="24">
             <el-form-item label="计算规则" prop="calrul">
-                <c-input
-                    v-model="model.calrul"
-                    placeholder="请输入计算规则"
-                >
-                </c-input>
+                <c-select style="width: 100%"
+                v-model="model.calrul"
+               placeholder="请选择计算规则"
+                :code="getCodesByKey('calrul')"
+            >
+            </c-select>
             </el-form-item>
         </c-col>
       <c-col :span="24">

src/views/Statics/Dbifec/FeeInfo.vue

@@ -30,20 +30,22 @@
       </c-col>
     <c-col :span="24">
           <el-form-item label="是否收入" prop="incflgFee">
-              <c-input
-                  v-model="model.incflgFee"
-                  placeholder="请输入是否收入"
-              >
-              </c-input>
+              <c-select style="width: 100%"
+                v-model="model.incflgFee"
+               placeholder="请选择是否收入"
+                :code="getCodesByKey('incflgFee')"
+            >
+            </c-select>
           </el-form-item>
       </c-col>
     <c-col :span="24">
           <el-form-item label="统计标志" prop="staflgFee">
-              <c-input
-                  v-model="model.staflgFee"
-                  placeholder="请输入统计标志"
-              >
-              </c-input>
+              <c-select style="width: 100%"
+                v-model="model.staflgFee"
+               placeholder="请选择统计标志"
+                :code="getCodesByKey('staflgFee')"
+            >
+            </c-select>
           </el-form-item>
       </c-col>
     <c-col :span="24">
@@ -179,12 +181,18 @@
 </template>
 
 <script>
+import codes from "~/config/CodeTable";
 export default {
   name: "fee",
   props: ["model"],
   data() {
     return {};
   },
+  methods:{
+    getCodesByKey(key) {
+      return codes[key] ?? [];
+     },
+  },
 };
 </script>
 

src/views/Statics/Dbipty/Adr.js

@@ -75,7 +75,7 @@ export default class Pty {
 
 export const Pattern = {
 	"usgpat": [
-		{ "required": true, "message": "必输项", "type": "string", "trigger": "blur" },
+		{ "required": false, "message": "必输项", "type": "string", "trigger": "blur" },
 		{ "max": 3, "message": "最大长度3个字符", "trigger": "blur" }
 	],
 	"adrstapat": [
@@ -211,15 +211,15 @@ export const Pattern = {
 		{ "max": 4, "message": "最大长度4个字符", "trigger": "blur" }
 	],
 	"manmod": [
-		{ "required": true, "message": "必输项", "type": "string", "trigger": "blur" },
+		{ "required": false, "message": "必输项", "type": "string", "trigger": "blur" },
 		{ "max": 1, "message": "最大长度1个字符", "trigger": "blur" }
 	],
 	"rtgflg": [
-		{ "required": true, "message": "必输项", "type": "string", "trigger": "blur" },
+		{ "required": false, "message": "必输项", "type": "string", "trigger": "blur" },
 		{ "max": 1, "message": "最大长度1个字符", "trigger": "blur" }
 	],
 	"tarflg": [
-		{ "required": true, "message": "必输项", "type": "string", "trigger": "blur" },
+		{ "required": false, "message": "必输项", "type": "string", "trigger": "blur" },
 		{ "max": 1, "message": "最大长度1个字符", "trigger": "blur" }
 	],
 	"dtacid": [

src/views/Statics/Dbipty/AdrInfo.vue

@@ -13,7 +13,7 @@
       <c-col :span="8" class="col-left">
         <c-col :span="24">
           <el-form-item label="地址使用代码" prop="usgpat">
-            <c-input v-model="adr.usgpat" placeholder="请输入地址使用代码"> </c-input>
+            <c-select v-model="adr.usgpat" style="width: 100%" placeholder="请选择地址使用代码" :code="getCodesByKey('usgpat')"> </c-select>
           </el-form-item>
         </c-col>
         <c-col :span="24">
@@ -170,7 +170,7 @@
         </c-col>
         <c-col :span="24">
           <el-form-item label="电报权限修改" prop="tlxaut">
-            <c-input v-model="adr.tlxaut" placeholder="请输入电报权限修改"> </c-input>
+            <c-select v-model="adr.tlxaut" style="width: 100%" placeholder="请选择电报权限修改" :code="getCodesByKey('tlxaut')"> </c-select>
           </el-form-item>
         </c-col>
       </c-col>
@@ -182,17 +182,17 @@
         </c-col>
         <c-col :span="24">
           <el-form-item label="手动更改标志" prop="manmod">
-            <c-input v-model="adr.manmod" placeholder="请输入手动更改标志"> </c-input>
+            <c-select v-model="adr.manmod" style="width: 100%" placeholder="请选择手动更改标志" :code="getCodesByKey('manmod')"> </c-select>
           </el-form-item>
         </c-col>
         <c-col :span="24">
           <el-form-item label="RTGS标志" prop="rtgflg">
-            <c-input v-model="adr.rtgflg" placeholder="请输入RTGS标志"> </c-input>
+            <c-select v-model="adr.rtgflg" style="width: 100%" placeholder="请选择RTGS标志" :code="getCodesByKey('rtgflg')"> </c-select>
           </el-form-item>
         </c-col>
         <c-col :span="24">
           <el-form-item label="TARGET标志" prop="tarflg">
-            <c-input v-model="adr.tarflg" placeholder="请输入TARGET标志"> </c-input>
+            <c-select v-model="adr.tarflg" style="width: 100%" placeholder="请选择TARGET标志" :code="getCodesByKey('tarflg')"> </c-select>
           </el-form-item>
         </c-col>
         <c-col :span="24">

src/views/Statics/Dbipty/Pty.js

@@ -88,7 +88,7 @@ export const Pattern = {
 		{ "max": 8, "message": "最大长度8个字符", "trigger": "blur" }
 	],
 	"hbkaccflg": [
-		{ "required": true, "message": "必输项", "type": "string", "trigger": "blur" },
+		{ "required": false, "message": "必输项", "type": "string", "trigger": "blur" },
 		{ "max": 1, "message": "最大长度1个字符", "trigger": "blur" }
 	],
 	"hbkconflg": [
@@ -100,7 +100,7 @@ export const Pattern = {
 		{ "max": 8, "message": "最大长度8个字符", "trigger": "blur" }
 	],
 	"heqaccflg": [
-		{ "required": true, "message": "必输项", "type": "string", "trigger": "blur" },
+		{ "required": false, "message": "必输项", "type": "string", "trigger": "blur" },
 		{ "max": 1, "message": "最大长度1个字符", "trigger": "blur" }
 	],
 	"heqconflg": [
@@ -188,15 +188,15 @@ export const Pattern = {
 		{ "pattern": /^-?\d{0,4}$/, "message": "整数不能超过4位", "trigger": "blur" }
 	],
 	"adrsta": [
-		{ "required": true, "message": "必输项", "type": "string", "trigger": "blur" },
+		{ "required": false, "message": "必输项", "type": "string", "trigger": "blur" },
 		{ "max": 1, "message": "最大长度1个字符", "trigger": "blur" }
 	],
 	"seltyp": [
-		{ "required": true, "message": "必输项", "type": "string", "trigger": "blur" },
+		{ "required": false, "message": "必输项", "type": "string", "trigger": "blur" },
 		{ "max": 1, "message": "最大长度1个字符", "trigger": "blur" }
 	],
 	"buytyp": [
-		{ "required": true, "message": "必输项", "type": "string", "trigger": "blur" },
+		{ "required": false, "message": "必输项", "type": "string", "trigger": "blur" },
 		{ "max": 1, "message": "最大长度1个字符", "trigger": "blur" }
 	],
 	"sla": [

src/views/Statics/Dbipty/PtyInfo.vue

@@ -23,8 +23,7 @@
       </c-col>
       <c-col :span="24">
         <el-form-item label="Housebank帐户标志" prop="hbkaccflg">
-          <c-input v-model="model.hbkaccflg" placeholder="请输入Housebank帐户标志">
-          </c-input>
+          <c-select v-model="model.hbkaccflg" style="width: 100%" placeholder="请选择Housebank帐户标志" :code="getCodesByKey('hbkaccflg')"> </c-select>
         </el-form-item>
       </c-col>
       <c-col :span="24">
@@ -40,8 +39,7 @@
       </c-col>
       <c-col :span="24">
         <el-form-item label="总行帐户标志" prop="heqaccflg">
-          <c-input v-model="model.heqaccflg" placeholder="请输入总行帐户标志">
-          </c-input>
+          <c-select v-model="model.heqaccflg" style="width: 100%" placeholder="请选择总行帐户标志" :code="getCodesByKey('hbkaccflg')"> </c-select>
         </el-form-item>
       </c-col>
       <c-col :span="24">
@@ -158,17 +156,17 @@
       </c-col>
       <c-col :span="24">
         <el-form-item label="地址状态" prop="adrsta">
-          <c-input v-model="model.adrsta" placeholder="请输入地址状态"> </c-input>
+          <c-select v-model="model.adrsta" style="width: 100%" placeholder="请选择地址状态" :code="getCodesByKey('adrsta1')"> </c-select>
         </el-form-item>
       </c-col>
       <c-col :span="24">
         <el-form-item label="客户信贷利率" prop="seltyp">
-          <c-input v-model="model.seltyp" placeholder="请输入客户信贷利率"> </c-input>
+          <c-select v-model="model.seltyp" style="width: 100%" placeholder="请选择客户信贷利率" :code="getCodesByKey('seltyp')"> </c-select>
         </el-form-item>
       </c-col>
       <c-col :span="24">
         <el-form-item label="客户借贷利率" prop="buytyp">
-          <c-input v-model="model.buytyp" placeholder="请输入客户借贷利率"> </c-input>
+          <c-select v-model="model.buytyp" style="width: 100%" placeholder="请选择客户借贷利率" :code="getCodesByKey('buytyp')"> </c-select>
         </el-form-item>
       </c-col>
       <c-col :span="24">

src/views/Statics/Dbiusr/UbrInfo.vue

@@ -22,11 +22,7 @@
         </c-col>
         <c-col :span="24">
           <el-form-item label="授权币种" prop="relcur">
-            <c-input
-                v-model="ubr.relcur"
-                placeholder="请输入授权币种"
-            >
-            </c-input>
+            <c-select v-model="ubr.relcur" style="width: 100%" placeholder="请选择授权币种" :code="getCodesByKey('curtxt')"> </c-select>
           </el-form-item>
         </c-col>
         <c-col :span="24">
@@ -49,11 +45,7 @@
         </c-col>
         <c-col :span="24">
           <el-form-item label="授权状态" prop="relgrp">
-            <c-input
-                v-model="ubr.relgrp"
-                placeholder="请输入授权状态"
-            >
-            </c-input>
+            <c-select v-model="ubr.relgrp" style="width: 100%" placeholder="请选择授权状态" :code="getCodesByKey('relgrp')"> </c-select>
           </el-form-item>
         </c-col>
       </c-col>
@@ -101,6 +93,7 @@
 
 <script>
 import { Pattern } from "./Ubr";
+import codes from "~/config/CodeTable";
 
 export default {
   name: "",
@@ -110,6 +103,11 @@ export default {
       rules: Pattern,
     };
   },
+  methods:{
+    getCodesByKey(key) {
+      return codes[key] ?? [];
+    },
+  },
 };
 </script>
 

src/views/Statics/Dbiusr/Usr.js

@@ -46,7 +46,7 @@ export const Pattern = {
         { "max": 40, "message": "最大长度40个字符", "trigger": "blur" }
     ],
     "lgiflg": [
-        { "required": true, "message": "必输项", "type": "string", "trigger": "blur" },
+        { "required": false, "message": "必输项", "type": "string", "trigger": "blur" },
         { "max": 1, "message": "最大长度1个字符", "trigger": "blur" }
     ],
     "ssnbegdattim": [ {"type": "string", "trigger": "blur"}

src/views/Statics/Dbiusr/UsrInfo.vue

@@ -21,11 +21,12 @@
       </c-col>
       <c-col :span="24">
         <el-form-item label="禁止登录" prop="lgiflg">
-          <c-input
-              v-model="model.lgiflg"
-              placeholder="请输入禁止登录标志"
-          >
-          </c-input>
+          <c-select style="width: 100%"
+                v-model="model.lgiflg"
+               placeholder="请选择禁止登录标识"
+                :code="getCodesByKey('lgiflg')"
+            >
+            </c-select>
         </el-form-item>
       </c-col>
       <c-col :span="24">

src/views/Statics/Infatp/Infsea.vue

@@ -102,9 +102,8 @@ export default {
     return {
       atpData: [],
       atpColumns: [
-				{ label: '交易配置信息代码', prop: 'cod', width: '240' },
-				{ label: '描述', prop: 'cod', width: '600' },
-				
+				{ label: '交易配置信息代码', prop: 'cod', width: 'auto' },
+				{ label: '描述', prop: 'cod', width: 'auto' },	
 			],
     };
   },

src/views/Statics/Infatx/Infsea.vue

@@ -5,7 +5,7 @@
 	
 	<c-col :span="24">
         <el-form-item label="保函文本用途" prop="atxcod">
-            <c-select
+            <c-select style="width: 100%"
                 v-model="model.atxcod"
                placeholder="请选择保函文本用途"
                 :code="getCodesByKey('atxcod')"
@@ -31,7 +31,7 @@
     <c-col :span="12" v-if="(this.model.atxcod==`1`)" class="col-left">
     <c-col :span="24">
         <el-form-item label="出具目的" prop="gtxpurpos">
-            <c-select
+            <c-select style="width: 100%"
                 v-model="model.gtxpurpos"
                placeholder="请选择出具目的"
                 :code="getCodesByKey('gtxpurpos')"
@@ -42,7 +42,7 @@
 
     <c-col :span="24">
         <el-form-item label="保函包含类型" prop="gtxgartyp">
-            <c-select
+            <c-select style="width: 100%"
                 v-model="model.gtxgartyp"
                placeholder="请选择保函包含类型"
                 :code="getCodesByKey('gtxgartyp')"
@@ -53,7 +53,7 @@
 	
 	<c-col :span="24">
         <el-form-item label="保函格式" prop="gtxlegfrm">
-             <c-select
+             <c-select style="width: 100%"
                 v-model="model.sealegfrm"
                placeholder="请选择保函格式"
                 :code="getCodesByKey('gtxlegfrm')"
@@ -67,7 +67,7 @@
 <c-col :span="12" v-if="(this.model.atxcod==`1`)" class="col-right">
 	<c-col :span="24">
         <el-form-item label="语言" prop="gtxuil">
-            <c-select
+            <c-select style="width: 100%"
                 v-model="model.gtxuil"
                placeholder="请选择语言"
                 :code="getCodesByKey('gtxuil')"
@@ -78,7 +78,7 @@
 	
 	 <c-col :span="24">
         <el-form-item label="保函无责任担保标志" prop="gtxexpflg">
-            <c-select
+            <c-select style="width: 100%"
                 v-model="model.gtxexpflg"
                placeholder="请选择保函无责任担保标志"
                 :code="getCodesByKey('gtxexpflg')"

src/views/Statics/Infatx/index.vue

@@ -4,7 +4,7 @@
       <el-form
         :model="model"
         ref="modelForm"
-        label-width="120px"
+        label-width="140px"
         label-position="right"
         size="small"
       >